The MAMMOTION LUBA 3 AWD is one of the most ambitious robot mowers I’ve tested, and after spending time setting it up, mapping it, and running it on a genuinely challenging property, I can say this much straight away: it’s a seriously impressive bit of kit.
This is the LUBA 3 AWD 5000, designed for lawns up to 5,000 square meters, or about 1.25 acres. It sits at the top of MAMMOTION’s current range and combines LiDAR, NetRTK, and AI vision in one mower. Add in all-wheel drive, steep slope capability, and some very clever mapping tools in the app, and it’s easy to see why there’s so much interest around it.
What really matters though is not the spec sheet. It’s whether the mower actually works where other robot mowers struggle. Dense tree cover. Gravel crossings. Ramps. Slopes. Isolated lawn zones. Obstacles that haven’t been manually marked out. That’s exactly what I tested it on.
What comes in the box
Unboxing the LUBA 3 AWD is refreshingly straightforward. There isn’t much assembly to do, and most of what’s included is exactly what you’d expect for a premium wire-free robot mower.
In the box, you get:
- The mower itself, in this case the LUBA 3 AWD 5000
- The charging station
- Power supply
- Cleaning brush
- Two sets of spare blades with screws
- Two safety keys
- Ground screws and hex key for securing the charging station
- Pegs for cable management if needed
- Charging station cover piece
- User guide and quick start guide
- Tool for assembly, with both hex and Phillips ends
One important regional difference needs mentioning.
In the UK and Europe, the LUBA 3 AWD is generally using NetRTK through MAMMOTION’s iNavi service, so there is no RTK station included in the box. In some regions of the US, the mower currently does ship with an RTK station and pole. That depends on iNavi coverage rollout, so if you’re in the US it’s worth checking MAMMOTION’s iNavi coverage map before buying.
As MAMMOTION notes, coverage maps are for reference only, and real-world performance can still be affected by terrain, buildings, weather, interference, mower condition, and local signal conditions.
Assembly is minimal
When I say assembly, I really do mean minimal.
The main jobs are:
- Fit the front bumper
- Clip on the charging station cover
- Attach the side guards
- Insert the safety key
The bumper includes a sensor and forms part of the mower’s obstacle detection system, so it’s important to fit it properly. It clips in, then gets secured with screws. The side guards mount underneath and line up with pre-positioned screws, so that part is simple as well.
A nice touch here is that the camera and LiDAR module is already installed on the full-size LUBA 3. On some smaller models in the range, there’s a little more setup involved, but not here.
MAMMOTION also includes molded packaging that lets you safely turn the mower upside down without putting pressure on the LiDAR module. It’s a small thing, but it shows some thought has gone into the setup process.
LUBA 3 AWD 5000 specs that actually matter
There are plenty of headline specs, but the key ones are the features that make a real difference in day-to-day use.
The LUBA 3 AWD uses three navigation technologies together:
- NetRTK
- AI vision camera
- 360-degree LiDAR
This is what makes the mower so interesting. Open areas are one thing. Plenty of robot mowers can handle open sky. The real challenge comes when GPS gets patchy under trees, near structures, or in more complex landscapes.
That’s where the LUBA 3 is trying to separate itself from the pack.
Cutting system
- Cutting width: 40 cm or 15.7 inches
- Blade setup: 2 cutting discs with 6 blades each, so 12 blades total
- Standard cutting height: 25 mm to 70 mm, or 1 inch to 2.7 inches
For US buyers, there is also an H version with a higher cutting range of 2.2 inches to 4 inches, designed for tougher and taller grass types.
Drive system and slopes
- All-wheel drive
- Dual 165W motors
- Slope capability: up to 80% or 38.6 degrees
That 80% slope figure is massive. Very few robot mowers can genuinely claim that kind of climbing ability, and in practice the four-wheel-drive setup is one of the LUBA 3’s biggest strengths.
Battery and coverage
- Battery: 15Ah on the 5000 model
- Typical mowing rate: around 500 square meters per hour
- Runtime: up to 215 minutes according to the product description
- Zones: up to 50
The mower can also adjust blade speed depending on grass conditions, stepping up from around 2,700 RPM to 3,000 RPM when it detects tougher grass, then backing off again to preserve battery runtime.
LUBA 3 AWD Series: Guidance & Motor Comparison
| Feature | LUBA 3 AWD 1500 | LUBA 3 AWD 3000 | LUBA 3 AWD 5000 |
|---|---|---|---|
| Max Lawn Size | 1,500 ㎡ | 3,000 ㎡ | 5,000 ㎡ |
| 360° LiDAR | ✅ Included | ✅ Included | ✅ Included |
| Dual-Camera AI Vision | ✅ Included | ✅ Included | ✅ Included |
| NetRTK (Network RTK) | ❌ No | ✅ Included | ✅ Included |
| Positioning System | Dual-Fusion | Tri-Fusion | Tri-Fusion |
| Cutting Motor Power | 88W | 165W (High Torque) | 165W (High Torque) |
| Battery Capacity | 9.4 Ah | 12 Ah | 15 Ah |
| Mowing Time (Charge) | 135 Minutes | 175 Minutes | 215 Minutes |
| Max Smart Zones | 15 Zones | 30 Zones | 50 Zones |
All models come with a three-year warranty.
For me, the key breakpoint is this: if you want the full tri-fusion navigation system, you need to move up from the 1500 to at least the 3000.
Check Best Price for LUBA 3 AWD
Where the LUBA 3 fits in MAMMOTION’s lineup
MAMMOTION now has a mower range that covers quite a few different lawn types, and that’s useful because not every property needs a large AWD flagship mower.
If you’ve got a smaller, flatter lawn and don’t need four-wheel drive, something like the YUKA Mini 2 may make more sense. If edge cutting is more important and you want a more compact machine, the LUBA Mini 2 has a lot going for it, especially with its side cutting disc for closer edge work.
But if you’ve got:
- larger areas to cover,
- challenging terrain,
- slopes,
- tree cover,
- multiple zones,
- or awkward transitions between areas,
that’s where the LUBA 3 AWD starts to make a lot of sense.
Why I tested it on a difficult property
My own lawn would not have been a proper test for this mower. It’s relatively straightforward and much more suited to something like the LUBA Mini range.
So I installed the LUBA 3 on my neighbor’s farm, where there were already two robot mowers in use:
- An earlier LUBA 2
- A Hookii Neomow X, which uses LiDAR and camera guidance
This was ideal because I could directly compare how different navigation systems handled real-world problem areas.
The LUBA 2 had already shown its limitations under heavy tree cover. Once GPS dropped out, it relied more heavily on camera guidance and could get confused. The Neomow X handled the tree-covered area better thanks to LiDAR, but because it is not four-wheel drive, it could still get stuck on raised roots, logs, pine cones, and uneven terrain.
That is exactly the sort of gap the LUBA 3 is aiming to fill.
Setting up the charging station
The charging station setup is straightforward. I positioned it on the lawn and secured it with the supplied ground screws.
You do not have to put the charging station on the grass. It can sit on a path or hardstanding if that suits your layout better. In some setups that’s preferable because it keeps grass from growing up around the base.
Once powered up, I placed the mower on charge and moved on to the app setup.
NetRTK and 4G: one of the best parts of this mower
This is one of the areas where the LUBA 3 really stands out.
Instead of relying solely on a single local RTK reference station, the mower can use NetRTK through MAMMOTION’s iNavi service. In my experience, this is a real improvement. With multiple correction sources feeding the mower rather than one local point, positioning has felt more accurate and more reliable.
There are a few practical advantages here:
- No RTK pole to install where iNavi is supported
- Free NetRTK for the lifetime of the mower
- Three years of included 4G service
- Wi-Fi can be used where coverage is available
After the included three years, the 4G renewal cost is relatively modest, around the sort of price that’s easy to justify for a machine of this type.
If your property has solid Wi-Fi across the working area, you may barely need the cellular connection. But on larger properties, that built-in 4G is a very useful backup.
Adding the mower to the app and updating firmware
MAMMOTION has made the onboarding process very simple.
The app found the mower quickly, walked me through the completed setup steps, and let me name the mower before moving straight into mapping. I also updated the firmware before doing anything else, which is always worth doing on a newly released mower.
That matters even more here because some newer features are still being refined. MAMMOTION has clearly been updating the platform regularly, and there are beta functions already present in the app.
Manual mapping vs auto mapping
The LUBA 3 gives you both auto mapping and manual mapping, but I still prefer to map manually.
Auto mapping can work well, and I’ve seen it perform nicely on other MAMMOTION models. But if I’m only mapping a lawn once, I’d rather take my time and get the boundary exactly where I want it.
Another big advantage with NetRTK is that you’re not having to remap every year just because an RTK pole has moved. You can relocate the charging station and keep the map, which makes a manual first map much more worthwhile.
One thing I really like about MAMMOTION mowers is the control speed while mapping. You can creep along at a snail’s pace if you want to, which gives you much more precision than some other robot mowers that feel too jumpy or too fast during setup.
Creating the main mowing area
For the first test area, I manually mapped a large section of the property that included:
- open lawn,
- edges shared with another robot mower’s area,
- dense tree coverage,
- a pond,
- and a steep slope.
As I mapped, I also used the reverse-and-delete function to correct a section where a hose was crossing the intended route. That feature works very well and saves you from having to start over when you make a small mistake.
The first mapped area came out at around 4,000 square meters, leaving room within the 5,000 square meter capacity to add another separate zone.
No-go zones, virtual fences, and obstacle-free zones
This is where the LUBA 3 becomes much more than just a robot mower with GPS.
No-go zones
I created a no-go zone around the pond. That’s the obvious thing to do around water, and the process was simple. I drove the mower around the area I wanted excluded and saved it into the map.
Virtual fence
I also tested the virtual fence feature. Unlike a no-go zone, this is drawn directly on the map rather than created by physically driving the mower around an object. It effectively acts as a solid barrier that the mower should not cross.
That’s especially useful in places where you want to define a boundary or unsafe edge without having to make it part of a full no-go shape.
Obstacle-free zone
This feature impressed me the most.
I had a gravel driveway and a pair of ramps linking one lawn area to another. Initially, when I tried to send the mower back to charge, it detected the ramp as an obstacle and refused to proceed.
Rather than disabling obstacle avoidance entirely, I created an obstacle-free zone specifically around the ramp area. That told the mower to ignore what it would otherwise classify as an obstacle in that exact section, while keeping obstacle detection active everywhere else.
That is a brilliant feature because it solves a very real problem in a very clean way.
Creating a long channel between two separate lawn areas
One of the tests I was most interested in was whether the LUBA 3 could handle a long travel channel between two zones.
With smaller MAMMOTION models, I’ve seen distance limits become a factor. So I mapped a route that took the mower:
- out of the main area,
- through another mower’s territory,
- across deep pea gravel,
- down one ramp,
- and up another,
- into a separate lawn zone.
To my surprise, the LUBA 3 handled the channel with no complaint at all. No warning that the path was too long. No issue setting the endpoint. It simply accepted the route and saved the second area.
That’s a major plus for more complex properties.
Check Best Price for LUBA 3 AWD
How it performed on the gravel driveway and ramps
This was one of the standout moments of the whole test.
The Hookii mower had struggled badly on the gravel because its smaller front wheels dug in. The LUBA 3, thanks to four-wheel drive and its tire setup, just drove straight over it.
Once I created the obstacle-free zones for the ramps, it also handled those transitions beautifully.
So in practical terms, yes, the combination of:
- AWD traction
- LiDAR awareness
- precise map controls
- and app-based obstacle-free zoning
made the LUBA 3 capable of linking areas that many robot mowers would simply fail to reach.
Mowing setup and cutting options in the app
Before sending the mower out to work, I adjusted the mowing settings in the app.
The options include:
- cutting height
- task speed
- cutting path spacing
- cutting angle
- zigzag, checkerboard, or perimeter-only patterns
- perimeter laps
- obstacle avoidance mode
- no-go zone laps
- path order, such as perimeter first
For the isolated test zone, I reduced the cut height from the default 70 mm to 30 mm and set the mower to run a zigzag pattern with perimeter-first mowing so I could evaluate how closely it followed the edge.
Actual mowing performance
Once the LUBA 3 was out on the lawn, things got very interesting very quickly.
It crossed the gravel driveway, went down the ramp, came up the other side, and entered the isolated mowing zone without any drama at all. That alone was impressive.
But what really stood out was how well it handled obstacles that I had not manually mapped.
Bench detection
I deliberately left a bench unmarked to see what would happen. The mower approached it, assessed the area, and neatly worked around it without trying to crawl underneath and beach itself.
That suggested the LiDAR was doing exactly what it should be doing, identifying the object’s shape and height and planning around it intelligently.
Raised vs flat objects
The mower also crossed a flat drain cover with no issue, which is exactly what you’d want. If something is flush with the lawn, there’s no need to leave trimming behind.
But when it came to a raised lawn light that would have caught the blades, the mower detected it and avoided it. Again, that points to the LiDAR giving it very useful environmental awareness beyond simple camera vision.
Tree-covered areas
This was one of the biggest reasons I wanted to test the mower on this property in the first place.
Under dense tree coverage, earlier RTK-heavy systems can become unreliable. The LUBA 3, however, is designed specifically to cope with that by combining RTK with LiDAR and vision. Early performance here was very promising. It navigated under the trees far better than the older LUBA 2 had managed in the same environment.
What happened when it got stuck
To be fair, the mower did get stuck during one of the larger mowing sessions. But in this case it was my fault, not the mower’s.
I had failed to map a ditch with stones as a no-go zone. The LUBA 3 ended up facing down into that ditch and stopped.
That isn’t really a criticism of the machine. It was exactly the sort of area that should have been excluded from the map in the first place. Once I added the no-go zone, that issue was resolved.
What I did notice, though, was one app limitation.
On the older LUBA 2, it was possible to restart a mowing task from a percentage point, for example resuming from 73% instead of restarting the entire task. On the LUBA 3, that option wasn’t available in the app at the time I tested it. I suspect it may be added later, but as things stood, a stopped mow had to be restarted from the beginning.
DropMow and other useful app features
The LUBA 3 includes some newer features that are worth knowing about.
DropMow
This lets you manually place or drive the mower into an area and have it create a temporary map for mowing, without counting against your total mapped square meter allowance.
That’s useful if you occasionally want to mow an area outside your permanent zones. On a mower this size and weight, you may not want to physically carry it around too often, but the feature is still genuinely handy.
Charging and power management
The app also includes smart charging features, including off-peak charging options and charging limits. That’s a nice addition for anyone trying to manage electricity use a bit more carefully.
Long grass test
I’m often asked to test robot mowers in long grass. Usually, I don’t consider that especially useful because robotic mowing is really about frequent light cuts and mulching, not hacking down neglected growth.
Still, I did test the LUBA 3 in a patch of longer grass to see what sort of reserve power it had.
I lowered the deck first to 45 mm, then down to 30 mm, and manually drove it into the longer patch. It had no problem at all. The mower coped easily, and it was clear that the more powerful dual-motor setup on the 3000 and 5000 models gives this machine serious cutting ability.
That said, I’d still use a traditional mower for the first cut of the season and then let the robot maintain the lawn from there. That’s the best way to use any robot mower.
Obstacle avoidance test
I also tested obstacle detection with a football and then with a smaller dog toy placed in the mower’s path quite late.
The LUBA 3 detected both successfully and adjusted around them without issue.
That’s important if you’ve got pets, toys, or unpredictable objects on the lawn. Just as importantly, the mower doesn’t abandon the whole strip after detecting an obstacle. It comes back and finishes the uncut section behind the object where appropriate.
What I like most about the LUBA 3 AWD
There’s a lot to like here, but the biggest strengths are clear.
The combination of LiDAR, RTK, and AI vision is what makes this mower feel different. It has the precision of RTK where signal is available, with the added confidence of LiDAR and camera assistance in more difficult areas.
2. Four-wheel drive is not a gimmick
The AWD setup genuinely changes what this mower can handle. Gravel, ramps, steep sections, uneven ground, and transition points are all much more manageable here than on two-wheel-drive mowers.
3. The app is very powerful
Features like:
- no-go zones,
- virtual fences,
- obstacle-free zones,
- DropMow,
- custom mowing patterns,
- and mower sharing
make the whole system flexible enough for large and awkward properties.
4. Setup is easy
For a mower this advanced, setup was surprisingly painless. Assembly was quick, app pairing was easy, and mapping was smooth.
5. NetRTK is a major benefit
Where iNavi coverage is available, not needing to install a traditional RTK base station is a big practical advantage.
Cons and limitations
I had to think hard here because there really weren’t many negatives at this stage.
The two main ones I found were:
- No resume-from-percentage option in the app at the time of testing, unlike the older LUBA 2
- No RTK signal readout in the app interface yet, although MAMMOTION has indicated that this is coming
Those are relatively minor software issues rather than fundamental hardware weaknesses, and both seem likely to be addressed.
- What's in the Box: 1*LUBA 3 AWD 3000H, 1*Garage (Shipped Separately), Extra One Set of Blades, 1*Charging Station, Other Accessories, 1*Product Guide.
- Tri-Fusion Navigation Technology: Integrating 360° LiDAR, NetRTK, and Dual-Camera AI Vision, LUBA 3 AWD 3000H sets a new standard in lawn mastery. By using 360° LiDAR for navigation, AI Vision for rapid object recognition, and NetRTK for corrections, it delivers intelligent sensor switching, and seamless navigation across any lawn or terrain.
- 360° LiDAR: With a sweeping 360° horizontal and 59° vertical LiDAR view and a range of up to 230 ft, LUBA 3 AWD captures your entire yard with extraordinary precision. Millions of laser returns are transformed into a dense, real-time point cloud that maps everything from ground level to tree canopies and enabling it to handle even the most demanding lawns.
- Off-Road Performance: With four independently motors, the LUBA 3 AWD climbs slopes up to 80% (38.6°) with ease, and pivots smoothly using the omni wheelto ensure precise turns and a clean turf. Its adaptive suspension system allows it to step over curbs, roots, and thresholds up to 50 mm high without getting stuck, delivering reliable mowing performance across any terrain.
- 300+ Obstacle Avoidance: The upgraded AI processor doubles LUBA 3 AWD’s perception and decision-making speed, allowing it to swiftly detect objects, analyze environments, and respond intelligently to any situation. The system identifies over 300 obstacle types and calculates the safest, most efficient path in real time, ensuring precise and uninterrupted lawn coverage.
- Ultra-Powerful 165W Cutting: Two high-torque 165W motors with 6-blade discs work with AI vision to automatically adjust speed and power based on grass density, maximizing cutting performance and energy efficiency. With a rechargeable lithium battery of up to 12Ah, the mower runs up to 175 mins per charge, covering up to 500m²/h with steady performance.
Last update on 2026-05-19 / Affiliate links / Images from Amazon Product Advertising API
Who the LUBA 3 AWD is best for
I think this mower makes the most sense for people with:
- large lawns
- multiple mowing zones
- tree-covered areas
- slopes or rougher terrain
- gravel crossings or awkward transitions
- a need for wire-free, high-precision mowing
If your lawn is small, flat, and simple, you may be better served by one of the smaller MAMMOTION models. But if your property is difficult, this is the kind of machine that starts to justify its flagship status.
My final verdict
So, is the LUBA 3 AWD the perfect robot mower?
No mower is perfect in every situation, and long-term reliability always matters more than first impressions. I’ll be keeping an eye on how it performs over a longer period, especially under tree cover and around map edges.
But based on setup, mapping, features, and real-world performance so far, the MAMMOTION LUBA 3 AWD 5000 is one of the most capable robot mowers I’ve used.
It handled a difficult property better than I expected. It crossed gravel. It climbed ramps. It navigated around unmarked obstacles intelligently. It mowed cleanly. It striped well. And it made very good use of its tri-fusion positioning system.
If you want a premium wire-free robot mower for a large or complex lawn, the LUBA 3 AWD comes highly recommended.
The package is made even stronger by the three-year warranty, three years of included 4G service, and lifetime access to iNavi / NetRTK.
For the right lawn, it’s an outstanding machine.
Check Best Price for LUBA 3 AWD